Generally, after the construction of epoxy floor paint for a period of time, some of the epoxy floor paint film after construction will produce adhesion problems with the base layer, which will make the coating patches or the overall separation from the ground. This phenomenon is often caused by many factors neglected by epoxy floor paint manufacturers in the construction of epoxy floor paint. 其主要原因有以下：
The main reasons are as follows:
1. The improper pretreatment before construction and other impurities on the ground, such as oil, water soluble substances, rust, etc., make the construction environment unclean.
2. The interval between pretreatment and epoxy floor paint construction is too long, which leads to dust impurities continuing to appear on the surface.
3. There is also the construction operation that starts when the ground is not well done. It is necessary to know that if construction is carried out on wet ground, there will be a risk that the epoxy floor paint layer will break away from the ground.
4. The combination of the base material and the epoxy floor paint coating is not ideal. The reason is that the base material is not easy to adhere to because of its high smoothness. It may also be that the coating configuration of the epoxy floor paint is inappropriate, which needs to be configured according to local environmental factors.
5. There is no drying treatment for the surface layer or insufficient drying treatment, which results in unstable peeling of the epoxy floor paint during the construction of the epoxy floor paint by the epoxy floor paint manufacturer.
1. The epoxy floor paint manufacturer cleans the surface of the epoxy floor which is going to be constructed. If it encounters the surface with higher smoothness, it will be treated with sand blasting or sand, so as to enhance its roughness and facilitate construction.
2. The ground air-drying can not be too long when it is well handled. Generally, it takes about 3-4 hours to start construction. The ground can also be dried at the same time.
3. Floor paint manufacturers should choose materials with high geological suitability with their base when constructing epoxy floor paint, and ensure that their adhesion can adapt to the material of their floor.本站网址：http://www.wuxispeed.com